6
To attach the softbox to the Venture TTL 600, follow these
steps:
1.
Place the softbox down on a flat surface, and spread
the tension rods.
2.
Lock each rod into place by pressing down on base
of the rod until the locking tab snaps into position on
the ring.
Tip:
Work in pairs of rods directly opposite each other.
3.
Once the rods are locked into position, separate the
touch-fastener strips around the ring to widen the
opening.
4.
Remove the accessory locking knob on the
Venture TTL monolight and set it aside. Remove all
attachments from the front of the monolight except the
glass cover.
Note:
Performing the following steps might be easier
with the pistol grip attached to the monolight.
5.
Loosen the locking knob on the attachment ring, and
align the mounting pegs of the monolight with the slots
on the ring. Insert the monolight into the ring.
Assembling the Softbox
