Page 4
DISPLAY
2
3
4
8
9
10
6
7
1
5
(1)
Target ID scale.
(2)
Cursor showing the ID of the detected target on the ID scale. It also indicates the IDs
filtered by Disc. and Notch Filter settings as well as the tone breakpoints. In the Static
modes, it indicates the signal strength.
(3)
Search Modes.
(4)
Basic Settings.
(5)
Section which shows the warning messages.
(6)
Section which shows the Target ID upon target detection, the ground balance whole
number value during ground balancing and the estimated target depth in the pinpoint
mode. In addition, the numeric value of any setting selected from the menu is displayed
in this field.
(7)
Magnetic mineralization indicator.
(8)
Expert Settings.
(9)
Section which shows the fine tuning value during ground balance adjustment and
current ground balance value during search.
(10)
Battery level indicator.
