www.impactstudiolighting.com
For our other lighting equipment,
please visit our Web site
impact
© Copyright 2013 Gradus Group
Limited One Year Warranty
Impact Studio Lighting provides a limited warranty that this product is free from
defects in materials and workmanship to the original purchaser under normal use
for a period of one (1) year from the original purchase date or thirty (30) days after
replacement whichever occurs later. Our responsibility with respect to this
limited warranty shall be limited solely to repair or replacement, at its option, of
any product which fails during normal consumer use. To obtain warranty
coverage during the Warranty Period, contact your place of purchase (“Seller”)
to obtain a return merchandise authorization (“RMA”) number, and return to
Seller the defective product along with proof of purchase and the RMA number.
This warranty does not extend to damage or failure which results from misuse,
neglect, accident, alteration, abuse, improper installation or maintenance.
EXCEPT AS PROVIDED HEREIN, IMPACT STUDIO LIGHTING MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT
NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal
rights, and you may also have additional rights which vary from state to state.
Introduction
Thank you for choosing Impact.
Congratulations on your purchase of the Impact CC-131 Double Ball-Joint
Head. This handy adapter features dual 5/8 inch spigots attached via
individual ball joints. For optimal mounting compatibility, one spigot has a
1/4
″
-20 threaded socket and one spigot has a 3/8 inch threaded socket. You
can adjust the angle of both spigots and tighten them at once with the
large, ratchet-style handle.
The CC-131 is ideal for mounting a camera, lighting fixture, or light modifier
to a super clamp or a light stand.
Recommended Accessories
•
Impact BHE-104 Camera Bracket Platform for Holding Arms
•
Impact CA-100 Double End Spigot with 1/4
″
-20 and 3/8
″
Male Threads
•
Impact CC-118 Micro Clamp
•
Impact CA-112 3/8
″
Male to 1/4
″
-20 Male Adapter Spigot
•
Impact CA-115 3/8
″
Male to 3/8
″
Male Adapter Spigot
Visit our website at www.ImpactStudioLighting.com for more Impact
accessories.
CC-131
Double Ball-Joint Head
INSTRUCTIONS
Specifications
Spigot size:
5/8 in.
Thread size:
1/4
″
-20 and 3/8 in.
Maximum load capacity:
6 lb.
Warnings
⚠
•
Please read and follow these instructions, and keep this manual in a
safe place.
•
Handle the unit with care.
•
Clean the unit with a soft, dry cloth.
•
Keep this unit away from children.
•
Make sure everything is secure before proceeding.
•
Make sure the item is intact and that there are no missing parts.
•
Do not exceed the maximum load capacity.
•
Use caution when mounting anything at the maximum load capacity.
•
All photos are for illustrative purposes only.
This IMPACT product is warranted to the original purchaser to be free from defects in materials and workman-
ship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days
after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited war-
ranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during
normal use of this product in its intended manner and in its intended environment. Inoperability of the product or
part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider
reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improp-
er installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEI-
THER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO
ANY IMPLIED WARRANY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This war-
ranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof
of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information, or to arrange service, visit www.impactstudiolighting.com or call Customer Service at
212-594-2353.
Impact is a Gradus Group Brand. Product warranty provided by the Gradus Group. www.gradusgroup.com
IMPACT is a registered trademark of the Gradus Group. © 2014 Gradus Group LLC. All Rights Reserved
