Fig.3 Low Level Input using RCA (XT 9.0KW)
Choose the correct length and style of RCA interconnects for your needs. Always use high quality
RCA audio cables (not supplied) for signal connections—those with multiple layers of shielding or a
twisted pair variety for better noise rejection.
Be extra careful when routing your RCA audio interconnect cables. Car environments are notorious
for poorly insulated wires. This means that hiss, engine noise, and fan noise can easily be picked
up through RCA cables if run incorrectly.
Make sure that the cables for power and audio signal are
not
on the same side of the vehicle and
that they do no cross each other; this will help reduce any noise that may radiate from the power
cable and the signal cable. If an audio cable is too close to a power cable, it may pick up the
magnetic field generated by the power cable, which could lead to a loss of quality in your signal.
Bass EQ Remote Controller Connection
Fig.4 Connection with RJ45 Jack
Your
X-Treme
D Class amp includes a Remote Bass control module. It uses standard telephone
wire and telephone RJ45 connectors. To connect the Remote Bass Control to the amplifier, simply
insert one end of the telephone plug into the REMOTE BASS EQ port. Plug the other end into the
remote module. Install the module within easy reach on or under your dash.
Speaker Output Connections
Single Voice Coil Subwoofer
9
