background image

 2

Features: 
 

  Fully HDCP™ compliant for use with High Definition Movies and Broadcasts 

 

  Supports 480i, 480p, 720p, 1080i and 1080p video resolution 

 

  LED displays video source and status 

 

  Simple installation and use 

 

 Cascadable 

 
 
 
 

 

 

 

 

 

 

Connecting Devices: 

1.   Make sure that your HDMI enabled device and televisions/monitors are turned off.  
 
2.  Using an HDMI cable (not included), connect the HDMI output on your source device to the   
     HDMI Input on the rear panel of the HDMI Splitter. 
 
3.  Using HDMI cables, connect the HDMI Splitter Outputs to the HDMI inputs on your           
     televisions/monitors. 

NOTE: The recommended maximum HDMI cable length connecting      

     your source device’s HDMI output to the HDMI Splitter Input is 5m.  The recommended    
     maximum HDMI cable length connecting the HDMI Outputs on the HDMI Splitter to the   
     HDMI inputs on your televisions/monitors is 15m.  Attempting to use longer cables may   
     give you a flickering, distorted or no image at all.  To obtain maximum distance we    
     recommend larger wire gauge cable.  Cable quality will affect distance.  For best   
     performance, we recommend using Sonicewave™ HDMI cable 
 

4.   Plug in the included 5VDC power adapter to rear panel of the HDMI Splitter, and the opposite      
     end into a receptacle outlet. 
 
5.   Power on HDMI enabled device as well as your televisions/monitors. 
 
6.  Change your televisions/monitors to its HDMI input (please refer to your television/monitor      
     owner’s manual if assistance is needed with changing inputs). 
 

LED Output  
Indicator Lights 

LED Power 
Indicator 
Light 

Summary of Contents for 40926









Reviews: