9
Step 1
Drill screw holes on the mounting surface as the positioning map shows, and then
put in the expansion bolts.
Step 2
Open the bracket, and then attach the bottom of the bracket to the mounting
surface with the self-tapping screws.
Step 3
Attach the other half of the bracket to the camera, then adjust the lens to the ideal
angle, and then fix the bracket.
Safety Instructions
-
Do not short circuit the battery with other metal.
-
Do not heat the battery or throw it into fire.
-
Do not take apart the battery or press it to make it deformed.
-
Keep the battery away from children.
-
It is recommended to use the original battery.
-
Do not use the battery at temperature above 60
℃
/140
℉
.
-
The battery cannot be charged at temperature below 0
℃
/32
℉
.
-
Recycle the waste battery as local regulations instructed.
About the Guide
-
This quick start guide is for reference only. Minor difference might be found in user
interface.
-
All the design and software here are subject to change without prior written notice.
-
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
-
Please visit our website or contact your local service engineer for more information.
-
If there is any uncertainty or controversy, please refer to our final explanation.