iWaylink Inc.
iMotion SC511 User Manual
60
Some function setting descriptions and examples
Customized start/end code setting example
Set the barcode start/end codes by scanning up to 10 characters per start or
end code. (To ensure that custom start/end codes can be output, please set
the custom start/end code output option of the scanner to on.
Add custom start code XYZ to all barcode types
Query the Appendix barcode type ID table with a HEX value of 99 for all code
systems. Query the ASCII table of visible characters, where XYZ corresponds
to a HEX value of 58,59,5A.
1.
Scan the custom start code and the Barcode Scanner will beep to
indicate successful decoding.
2.
Scan the appendix data and edit barcode for 9,9,5,8,5,9,5,A.
3.
Save to complete the setup.
4.
If you need to make changes to the scanned barcode before saving, you
can also scan to cancel the previous reading or cancel the previous
reading to set it up again.
5.
If you want to abort this setting, simply scan to cancel the current
setting.
Add a custom start code R to the QR code
1.
Query the Appendix barcode type ID table for a QR code with a HEX value
of 51. Check the ASCII table for the visible character, where the HEX
value of R is 52.
2.
Scan the custom start code, then scan the appendix data and edit
barcode for 5, 1, 5, 2.
3.
Save to complete the setup.
Cancel the custom start code of the QR code
1.
When customizing the start/end code, no other characters are added
after the barcode type, and saving clears the custom start/end code for
this type of barcode.
2.
After scanning the custom start code, scan the appendix/data and edit
the 5,1 in the barcode.
3.
Save to complete the setup.
4.
If you have previously added a start code for all bars, the QR code start
code will revert to the start code added for all bars after you have
completed this setting.
5.
To clear the start/end codes added for each barcode type, scan to clear
all custom start codes and clear all custom end codes.
