Caring for Compact Discs
Treat the disc carefully. Handle the disc only by its edges.
Never allow your fingers to come in contact with the
shiny, unprinted side of the disc.
Do not attach adhesive tape, stickers, etc. to the disc label.
Clean the discs periodically with a soft, lint-free, dry cloth. Never use detergents or
abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit. If a disc skips or
gets stuck on a section of the disc, it is probably dirty or dam-aged (scratched). When
cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of
the disc. Never wipe in circular motions.
1.
2.
3.
Cleaning the Unit
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on your unit may be cleaned with a dust cloth and cared for as other furniture.
Use caution when cleaning and wiping the plastic parts.
Mild soap and a damp cloth may be used on the front panel.
1.
2.
3.
To clean the lens
If the lens get dirty, your player may skip or may not play a CD
Open the CD door.
Use a camera lens blower/brush to blow on the lens once or twice, brush the dust or
particles off the lens, then blow again.
To remove fingerprints, use a dry cotton swab to wipe from the middle to outer edge
of the lens.
1.
2.
3.
4.
This unit is designed to play only discs bearing the identification logo as
shown here. Other discs may not conform to the CD standard and may
not play properly.
Discs should be stored in their cases after each use to avoid damage.
Do not expose discs to direct sunlight, high humidity, high temperatures, or dust, etc.
Prolonged exposure or extreme temperatures can warp the disc.
Do not stick or write anything on either side of the disc. Sharp writing instruments or
the ink may damage the surface.
4.
5.
6.
7.
12
CARE AND MAINTENANCE
