Immersion RC Vortex 230 Mojo, Quick Start Manual

Page: 11 / 17

Following ​ ​ the ​ ​ Wizard
The​ ​wizard​ ​is​ ​used​ ​primarily​ ​to​ ​let​ ​the​ ​Vortex​ ​learn​ ​the​ ​flight​ ​channel​ ​order,​ ​and​ ​R/C​ ​Tx​ ​mode​ ​(1,​ ​2,​ ​3,​ ​4).
‘Left’​ ​refers​ ​to​ ​moving​ ​the​ ​stick​ ​left,​ ​and​ ​‘Back’​ ​refers​ ​to​ ​moving​ ​the​ ​stick​ ​back​ ​towards​ ​you.
Follow​ ​the​ ​prompts,
ensuring​ ​that​ ​the​ ​correct
stick​ ​is​ ​moved​ ​each​ ​time.
As​ ​each​ ​control​ ​is
recognized,​ ​it’s​ ​name​ ​will
appear​ ​to​ ​the​ ​left​ ​of​ ​the
servo​ ​bar.
Take​ ​your​ ​time​ ​with​ ​this​ ​step,​ ​if​ ​the​ ​wrong​ ​stick​ ​movements​ ​are​ ​fed​ ​to​ ​the​ ​wizard,​ ​it​ ​will​ ​be​ ​difficult​ ​to
navigate​ ​the​ ​OSD​ ​to​ ​complete​ ​the​ ​setup.
Once​ ​the​ ​four​ ​primary​ ​flight
controls​ ​have​ ​been​ ​learned,
place​ ​the​ ​quad​ ​on​ ​a​ ​flat​ ​and
level​ ​surface​ ​and​ ​move​ ​the
right​ ​stick​ ​back.​ ​This​ ​will
calibrate​ ​the
accelerometer.
It​ ​is​ ​important​ ​that​ ​the​ ​quad
is​ ​level​ ​when​ ​this​ ​step​ ​is
performed,​ ​or​ ​the​ ​auto-level
flight​ ​modes​ ​will​ ​not
function​ ​correctly.
11