26
When the first phase has been designed, pass automatically
to the next functioning phases at comfort and economy
temperature in order to program. This means repeating the
points described previously up to phase 4.
The sequences of the On and Off states must always be
sequential. For example, it is not possible to set “OFF 2” at
13.30 and “ON 3” at 11.00.
Once the day or group of days have been programmed,
proceed in the same way for the remaining days and the
remaining programs.
N.B.:
if only 3 switch-on times are used, set the fourth with
switch-on/off time at 24.
N.B.
in automatic functioning conditions (
) the
display will show the 24 hour bar indicating the different
time phases with Comfort or Economy temperature
. The presence of the
hyphen on the time bar corresponds to functioning in
Comfort mode.
