Immergas 3.030863, Instructions And Warnings

Page: 41 / 48

41
Information Menu
Menu item Description
Return temperature 2 Temperature read by the return sensor of the backup generator
DHW Setpoint DHW Setpoint
DHW Temp. Temperature read by DHW probe
Board firmware ver. System firmware revision
Display firmware ver. Zone Remote Panel firmware revision
User Menù
Menu item Description Range
Customised
value
HP Disable It allows to disable the heat pump according to the set time slot Yes / No
HP Disable Start Allows to set when disabling starts 0 - 23 h
HP Disable End Allows to set when disabling ends 0 - 23 h
Dehumification Disable Disabling of request to the dehumidifier, according to the daily
time slot
Yes / No
Dehum. Disable Start Time of dehumidification request disabling phase start 0 - 23 h
Dehum. Disable End Time of dehumidification request disabling phase end 0 - 23 h
CH min. set Minimum flow temperature for heating 20 ÷ 85 °C
Cooling min. Set Minimum flow temperature for cooling 5 ÷ 25 °C