BIM-QSG-STP10-0919
Step 3
Warning - If you are using a non-Bimba motor, do not connect the motor
until you have configured the drive for your motor.
Refer to Step 5
Connect the drive to the motor. Four lead motors can be connected in only one
way, as shown in Figure 1.
We recommend that eight lead motors be connected in parallel, as shown in
Figure 2.
If using a non-Bimba motor, please refer to your motor specs for wiring
information.
Step 4
a. Connect the I/O
b. Connect the Encoder
(optional)
c. Connect to Ethernet
network
Step 5
a. Apply power to the drive.
b. Follow the configuration instructions in the
Bimba
IQ® Stepper
help screens.The
Bimba IQ®
Stepper
software can be used to set up your drive
for operation in several different modes including:
pulse and direction, analog velocity, SCL, and
IQ® programming.
Bimba IQ® Stepper
software
includes a self test option (under the Drive menu) to
verify that the motor and power supply are correctly wired and configured.
