9
Cleaning of the Unit
The mirror, the lenses and the colour wheel should be
cleaned at regular intervals, depending on impurities
caused by dirt, smoke or other particles. Only this will
ensure that the light is radiated at maximum bright-
ness.
Prior to opening the unit, disconnect the
mains plug from the socket.
Only use a soft, clean
cloth and a glass cleaner. Then carefully wipe the parts
dry.
For cleaning the other parts of the housing, only use
a soft, clean cloth. Never use any fluid; it may leak into
the unit and cause damage.
10 Specifications
Power supply: . . . . . . . . 230 V~ / 50 Hz
Power consumption: . . . 80 VA
Light source: . . . . . . . . . 1 super bright white LED,
10 W
Ambient temperature: . . 0 – 40 °C
Dimensions. . . . . . . . . . 195 × 180 × 400 mm
Weight: . . . . . . . . . . . . . 4 kg
Subject to technical modification.
10.1 DMX channels
*depending on the adjustment of channel 6 (dimmer)
DMX value Function
Channel 1: pan of mirror
0 – 255
approx. -90° to +90°
Channel 2: tilt of mirror
0 – 255
approx. 10° to 85°
Channel 3: stroboscope
0 – 7
light beam deactivated
8 – 15
light beam constantly activated
16 – 131
stroboscope: slow
→
fast
132 – 139
light beam constantly activated
140 – 181
The light beam will gradually become
brighter and will be deactivated after
reaching its maximum brightness*.
execution speed: slow
→
fast
182 – 189
light beam constantly activated
190 – 231
The light beam will gradually become
darker and will then switch back to
bright*.
execution speed: slow
→
fast
232 – 239
light beam constantly activated
240 – 247
stroboscope with random flash
sequence
248 – 255
light beam constantly activated
14
GB
All rights reserved by MONACOR
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
be reproduced in any form or by any means for any commercial use.