10
Deutsch
Deutsch Seite
Inhalt
Français
Français Page
Table des matières
Italiano
Italiano Pagina
Indice
Español
Español Página
Contenidos
Nederlands
Nederlands Pagina
Inhoud
Polski
Polski Strona
Spis treści
English
English Page
Contents
. . . . . . . . . . . . . . 10
4 .2 Inserting the batteries into the
. . . . . . . . . . . . . . 12
4 .3 Connecting the tie clip microphone and
attaching the pocket transmitter
4 .4 Adjusting the transmission channel
. . . . . . . . . . . . . . 13
Wireless Microphone System
These instructions are intended for users without
any specific technical knowledge . Please read these
instructions carefully prior to operation and keep
them for later reference .
All operating elements and connections de-
scribed can be found on the fold-out page 3 .
3
Display for channel indication
4
LED AF (audio frequency): lighting up when
the received audio signal exceeds a defined
level
5
Reception LEDs RF (radio frequency) A and B:
to indicate which of the two receiving parts
of the unit receives the more powerful radio
signal
6
IR window for the IR signals to adjust the chan-
nel of the wireless microphone or of the pocket
transmitter
7
Button ACT for sending the IR signals to adjust
the channel of the wireless microphone or of
the pocket transmitter
8
Power supply jack to connect the power supply
unit provided
9
POWER switch
10
XLR audio output for connection to a micro-
phone input
11
Audio output (6 .3 mm jack) for connection to
a line input
12
VOLUME control for the audio signal of the
outputs (10, 11)
13
SQUELCH control to adjust the threshold for
interference suppression
1.2 Wireless microphone
for TXS-616SET only
14
Display with channel indication and battery
status indication
15
Sensor for the IR signals to adjust the channel
16
On / off switch
lower position: off
mid-position: mute
upper position: on
17
Battery compartment
18
Switch LOCK to lock the microphone
position OFF: lock deactivated
position ON: lock activated
19
Switch POWER for the transmission power
position LO: low transmission power
position HI: high transmission power
1.3 Pocket transmitter
for TXS-636SET only
20
Transmitting antenna
21
On / off switch: OFF, STBY = mute, ON
1 Overview
1.1 Multi-frequency receiver
1
Receiving antennas A and B
2
Button SELECT for channel adjustment
– To automatically scan a free transmission
channel, press the button briefly .
– To manually adjust a channel, keep the but-
ton SELECT pressed until the units digit on
the display (3) starts flashing . Press the but-
ton briefly to adjust the units digit . Keep the
button pressed again until the tens digit on
the display starts flashing . Press the button
briefly to adjust the tens digit . (The frequen-
cies corresponding to the channels can be
found in the table on page 40 .)
Summary of Contents for 1000187
Page 41: ......
