4
○
3
Button:
MENU
To select the programming functions with short press.
DOWN
To go backward in the selected functions
UP
To go forward in the selected functions
ENTER
To confirm the selected functions
○
4
DMX input:
For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
○
5
DMX output:
For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
○
6
POWER input:
Connect to supply mains power.
○
7
Microphone:
Receive music for the sound active.
4.2 Main Function
To select any functions, press
MENU
button until the required one is shown on the display.
Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to
change the mode. Once the required mode has been selected, press
ENTER
button to
setup or it will automatically return to the main functions without any change after idling 30
seconds. Back to the functions without any change press
MENU
button. The main functions
are shown below:
DMX Address
1-512
Channel Mode
1CH
2 CH
4 CH
8 CH
10 CH
12 CH
Slave Mode
Master
Slave 1- Slave 15
Show Mode
Show0~Show12 Manual
Manual Mode
Dimmer 0 - 255
Strobe 0 - 255
Sound State
Sound mode
On - Off
Sound Sense
Sound sense 0-100%
