IMG STAGE LINE BEAM-20LED, Instruction Manual

Page: 18 / 28

16
Advanced Mode
You can select 6 different Advanced settings when using the BEAM- 20 LED Beam.
1) Press MODE until the display shows , then press ENTER to open the menu and change your
settings.
2) Use the UP / DOWN buttons to select all 6 settings.
Audio Sensitivity
1) When the display shows : , the device is in Audio Sensitivity Mode.
2) Press ENTER to open the menu and change your settings.
3) When you press Up/Down, you can set the audio sensitivity from 000 to 100. T
Pan movement Mode
1) When the display shows : and has been set to OFF, the device is in normal Pan Mode.
2) Press ENTER to open the menu and change your settings.
3) When you press Up/Down and set the device to ON, the Pan function is reversed.
Tilt movement Mode
1) When the display shows : and has been set to OFF, the device is in normal Tilt Mode.
2) Press ENTER to open the menu and change your settings.
3) When you press Up/Down and set the device to ON, the Tilt function is reversed.
Display Mode
1) When the display shows : and has been set to OFF, the device is in normal Display
Mode.
2) Press ENTER to open the menu and change your settings.
3) When you press Up/Down and set the device to ON, the Display function is reversed.
Pan Mode
1) When the display shows : , then press ENTER to open the menu and change your
settings. You are able to set 3 different Pan Angles.
Pan is 540º.
Pan is 360º.
Pan is 180º.
Tilt Mode
1) When the display shows : , then press ENTER to open the menu and change your
settings. You are able to set 3 different Tilt Angles.
Tilt is 270º.
Tilt is 180º.
Tilt is 090º.