imex LX3DG, Manual, Page: 9 / 13

User Guide, Maintenance and Care
• The LX3D is sealed and calibrated at the plant to the accuracies specified.
• It’s recommended to carry out an accuracy check before its first use and
periodic checks during future use.
• When not in use please power OFF the tool and place the pendulum lock in
its locked position.
• In Manual Mode, self leveling is OFF. The accuracy of the beam is dependant
on the user.
• Do not short any battery terminals, charge alkaline batteries or dispose of
batteries in the method listed on the battery.
• Do not mix old and new batteries. Replace all of them at the same time with
new batteries of the same brand and type.
• Keep batteries out of reach of children.
• Remove batteries if the tool will not be used for several months.
• Do not store the laser tool in direct sunlight or expose it to high temperatures.
The housing and some internal parts are made of plastics and may become
deformed at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth. Although these parts
are solvent resistant, NEVER use solvents. Use a soft, dry cloth to remove
moisture from the tool before storage.
• Store the tool in its case when not in use. If storing for extended time, remove
batteries before storage to prevent possible damage.
• Do not dispose of this product with household waste.
• Please recycle in line with local provisions for the collection and disposal of
electrical and electronic waste under the WEEE Directive.