ELECTRIC PIZZA OVEN USER’S MANUAL
4
F. OPERATION
1. Get through power supply, turn on power switch and turn thermostat knob to set
temperature in needed.
2. When temperature gets to the setting degree, open the door and put pizza into the
chamber to cook. (Please cut off power supply before this step in case of accident
happens.)
3. Turn off power switch when pizza is cooked and open the door to take pizza outside.
And put other pizza inside the machine to cook.
4. After all work finishing, please turn off power switch and cut off power supply.
G. CLEANING AND MAINTANENCE
1. Cut off the power supply before cleaning in case of accident happens.
2. Do not use wet towel with non-corrosive cleanser to clean the hollow boron plate, the
surface of the equipment and power cord. Direct wash by water is not permitted in case
of any damage of functions.
3. If you do not use it at any time, please turn off thermostat and main switch.
4. Please store the equipment in a ventilated warehouse without corrosive gas after
cleaning when ceasing its work for a long time.
H. TROUBLESHOOTING
Troubles
Causes
Solution
1. Plug the machine and
get through power supply,
power indicator is on but
not heat.
1. Thermostat is broken.
2. Heating element is burned.
1. Replace a new thermostat.
2. Replace a new heating
element.
2. Get through power
supply
and
turn
on
thermostat, temperature
is up but can not be
controlled.
1. Thermostat is out of action.
1. Replace a new thermostat.
3. Get through power
supply, turn on switch but
indicator is not on.
1. Indicator is broken.
1. Replace a new indicator.
4. Get through power
supply, indicator is not on
and not heat.
1. Power
supply
is
not
normal; power supply is not
get through.
2. Fuse is burned.
1. Check power supply and
wire connection to make
supply be normal.
2. Replace a new fuse.
