3. How to use the toaster
Plug in the toaster, insert bread slices into the slots
①
, set the dial
④
,
then the power indicating lamp
③
lights, activating the toaster. When
hear the ring of
〝
ding
〞
, the toasting cycle is complete. Press the
bread lifter
⑦
, the toast pops up out of the slots. Press the slice control
switch
②
to choose 2 or 4 or 6 bread slices to be toasted at one time for
Mod WCST6000 (choose 2 or 4 bread slices for Mod WCST4000).
4. Parameters
Type
ETS-4
ETS-4
Name
4-Slice Toaster
6-Slice Toaster
Rated load(V)
220-230V
220-230V
Rated power
1.8(1.1/1.8)KW
1.8(1.1/2.5)KW
Time of work
0-5 minutes
0-5 minutes
Slots number
Four pieces
Six pieces
Dimension
330×285×250mm
465×285×250mm
5. Circuit diagram
K1 - The time dial K2 - The slice control switch
HL1 - The power indicating light R1~R5 - The electric thermal
plate
6.The cleaning and the maintenance
1)The power should be turned off before cleaning and maintaining,
preventing accident.
2)Pull the toaster tray at the end of the toasters and emptying it. If the
toaster is often used, the accumulated over at least once a week should
be removed. Make sure that the toaster tray fully closed before the
toaster again.
3)After using, the surface of the pop-up toaster can be wiped with a soft
damp cloth without corrosive cleaner, while only dry cloth can be
applied to control switch.
4)It is prevented from flushing the machine with water against damage.
When not in use or storage, the mains cables on the underside of the
toasters be coiled.
7.Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in
accordance with the national regulations. It is advisable to contact a
company which is specialized in waste disposal, or just contact the
local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device
unfit for use before disposal. For that purpose disconnect device from
mains supply and remove mains
3
4