Imetec R1101, Instructions For Use Manual

Page: 19 / 113

17
EN
WARNING! DO NOT use this appliance if
there are visible signs of damage.
WARNING! DO NOT use the appliance
if the blades are damaged or do not
work properly.
Make sure that your hair is dry and clean, with no residue of hairspray,
mousse, gel or other hair products, and then brush in the direction of
growth, untangling any knots.
WARNING! Switch the appliance off
before changing any accessories.
MICRO-PRECISION TRIMMER LEVER (3)
The device has a lever for micro-adjustments of cutting settings which,
when the combs are not fitted, ensures 5 additional micro-adjustments
from 0.5 to 3 mm, in 0.6 mm steps.
To reduce the cutting length, move the lever upwards (a); to increase it,
move the lever downwards (b). When a "click" is heard, the next cutting
length has been reached.
USING THE SPACER COMBS (5)
To fit a spacer comb, follow the instructions provided below:
• Set the micro-adjustment lever (3) to the shortest cutting length
position (a).
• Select the spacer comb (5) of the desired size.
• Hook it to the cutting edge of the blade and push the rear of the comb
down until you hear a "click".
• Make sure the spacer comb is correctly inserted and clicked.
Remove the comb by pushing the hook on the rear of the comb
upwards.
COMBINED USE OF COMBS (5) AND THE MICRO-ADJUSTMENT