Imetec Belissima My Pro Ceramic P5 3800, Instructions For Use Manual

Page: 17 / 92

15
EN
WARNING! DO NOT wrap the supply
cord around the appliance.
DISPOSAL
The packaging of the appliance is made of recyclable materials.
Dispose of it in accordance with the environmental protection
regulations.
Pursuant to Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE), the crossed bin symbol on the
appliance or its packaging indicates that the appliance must
be disposed of separately from other waste at the end of its
useful life.
The user must therefore take the appliance to an appropriate
recycling centre for electrical and electronic equipment. Alternatively,
instead of handling the disposal, the user can hand over the appliance
to the retailer when a new, equivalent one is purchased. The user can
hand over electronic products measuring less than 25 cm to retailers
of electronic products having a sales area of at least 400 m
2
free of
charge and with no obligation to buy. Appropriate separate collection
for the subsequent procedure for the decommissioned appliance
for recycling, which includes treatment and environmentally friendly
disposal helps prevent adverse effects on the environment and health
and promotes reusing and/or recycling materials that the appliance
consists of.
ASSISTANCE AND WARRANTY
The appliance is guaranteed for a period of two years from the date of
delivery. Evidence shall be taken as the date indicated on the receipt/
invoice (provided it is legible), unless the buyer can prove that the
delivery occurred later.
In the event of a defect in the product which existed prior to the date
of delivery, appliance repair or replacement is guaranteed free of
charge, unless one of the two solutions is disproportionate to the
other. The buyer has the obligation to notify an authorised Service
Centre of the non-conformity within two months from discovering the
defect.
The warranty does not cover any part that may be defective due to:
a. transport damage or accidental drops,
b. incorrect installation or an inadequate electrical system,
c. repairs or alterations made by unauthorised personnel,
d. poor or incorrect maintenance and cleaning,
e. product and/or product parts subject to wear and/or
consumables, including the reduction in battery usage time due
to the use or time, if present,
f. failure to comply with the operating instructions and/or