E211101X_rev02_ENG
29/06/2022
5
On the electric board and on the elements with risk of electrocution, the here below warning picture is stuck.
Should it be damaged or removed, please ask for a new one to replace it.
ATTENTION!
Even if the main switch is in the position “0”, wires arriving to it have tension!
USER PSYCHOPHISICAL CONDITION
People working on the machine must be in perfect psychophysical condition; while people work a vertical
posture in front of the machine must be kept. Sudden or not controlled movement must be avoided, for example
during the introduction or collecting of the linen, to avoid dangerous impact with the machine structure.
Other people in the room must not destruct people working on the machine.
People working on the machine must not be destructed by TV, radio, etc. nor be object of any other source of
destruction.
ILLUMINATION
The room where the machine is installed needs an illumination with an intensity of 300-500 lux; Annoying flash
must be avoided.
READ THIS MANUAL WITH ATTENTION AND INFORM PEOPLE ABOUT INTERVENTION SYSTEM
IN CASE OF BLACK OUT OR ENTRAPMENT: CHECK THE POSITON AND THE CORRECT WORKING
OF THE HALT SYSTEM.
3.
MANUFACTURARE LIABILITY
The instruction here written are not replacing but only completing the dues for the respect of the in force normative on
safety and accident prevention.
Referring to what is written in this manual, the manufacturer is not responsible for:
Use of the machine not respecting the in force normative on safety an accident prevention matter.
Not correct machine installation.
Missing of periodical and programmed maintenance operations.
Not respect of this manual instruction.
Defect in the tension and supply net.
Not authorized machine modifications.
Use of the machine by not authorized personnel.
Use of the machine different from the instruction on the linen.
4.
TRANSPORT AND UNPACKING
Please control the machine at the receipt moment and signal to the forwarder any damaged due to the transport both on
the external structure and the internal parts.
The machine must be moved only using a forklift truck introducing the forks only and exclusively in the provided
supports.
