IMER U.S.A. Inc.
7
MINUTEMAN
1
2
SAFETY NOTES
DO
Read all the instructions before operating the mixer.
DO
Use caution when assembling and transporting the mixer. Tie it down good in your vehicle.
DO
Keep the mixer clean and free of debris and mix build-up. After using, fill the drum with
water and run the MINUTEMAN for 10 minutes or so, most of the cement will break
loose from the drum.
DO
Keep all the moving parts lightly lubricated, WD-40 may be sprayed all around the machine
(wheel axles, swivel bracket, etc.).
DO
Periodically inspect your mixer for abnormal wear or damage. If something does not
seem right call your dealer or IMER USA direct @ 800.275.5463.
ASSEMBLY - Follow drawings 1 thru 6 -
DO
Wear the appropiate safety gear; hard hat ,gloves, goggles, ear protection and wear
tight clothing around the mixer. Loose clothing can cause injury should it become
entangled with the mixer.
Do not start and stop the mixer with material in the drum, this will damage the motor and
is not the best way to mix.
Always have the drum rotating when filling or discharging the mixer, this produces the
highest quality concrete.
DO NOT
Place the main frame (# 18 Drawing 1) on a
level surface as illustrated in this diagram.
Insert and secure the T-bar (# 20 Drawing 1)
into the main frame with the 3" hex head bolt
and nut, using the open wrench provided in the
assembly kit.
Slide the wheels (# 8 Drawing 1) onto the main
frame bar(# 18 Drawing 1) and anchor them in
place with the cotter pins (# 13 Drawing 1)which
are included in the assembly kit provided with
each MINUTEMAN mixer.
