10/15 10783390 WEB E cod.CE20195A.
7
Conto D2
Resettable Parameters
Acting on the keyboard, it is possible to reset some parameters during the display
Partial Active Energy
Run Hour Meter
Run hour meter reset
(working hours and minutes)
it is available just if selected in course of
programming.
Anomy Display
Read error / timed energy backup
Turned on symbol on to all the display pages.
Unreliable read value, send the device to the manufacturer
Read error when the setup parameters are triggered
Turned on symbols on to all the display pages.
Turn off and turn on the meter, verify the setup data.
Press keybord, read the energy and send the device to the manufacturer.
Read error when the metrological and calibration constants are triggered
Turn off and turn on the meter.
If the defect persists, send the device to the manufacturer.
Total Active Energy
Partial Active Energy
Current
Voltage
Active Power
Frequency
Power Factor
Run Hour Meter
Reset
Reset
k
W
h