IME-DC Dextra, User Manual, Page: 44 / 56

TABLE OF CONTENTS
44
DATA TRANSFER
All saved measurement results can be transferred to and managed
on a PC using appropriate software. Only use the IME-DC USB data
cable for this purpose.
Insert the USB data cable into the USB port on your PC. Open a
compatible data transfer program on your PC. When prompted,
make sure that the blood glucose meter is switched off , and insert
the USB cable jack into the data port on the device (
68
). Now start
transfer of the data saved on the device (
69
).
NOTE
The basic requirement for data transfer is recognition of the blood glucose
meter by the data transfer program. If the
i Dia
blood glucose meter is not yet
listed there, please contact
IME-DC customer service
. If data transfer is still not
possible e ven when your computer does recognise your device, this could be
due to missing drivers.
A list of additional drivers can be found on our homepage at
www�imedc�de
under ‘ Downloads ‘.
68 69