MOBILE HAND WASH UNIT 5
Commissioning
Remove the front panel by unscrewing the black knob on the front of the unit, tilt
the panel backwards and pull upwards away from the unit at an upward angle.
This will enable the operator to gain access to the clean and waste water
containers inside the unit.
Once the front panel has been removed, lift out the suction hose from the clean
water container and remove the water container. Note the water container can
hold a maximum of 20 litres. Ensure when refitting the water container that the
suction hose has been placed at the bottom container.
We advise that you operate the foot pump and pass water through the unit before
refitting the front panel. To prime the pump ready for operation and pass water
through the unit; place your foot inside the housing above the pump. Depress the
foot pump several times until water is seen coming out of the spout located above
the sink on the unit.
Once all of the above steps have completed and the front panel has been refitted,
your Mobile Hand Wash Unit should now be ready for operation.