2
Installing the McBasic 10/100
The McBasic 10/100 comes ready to install. The only adjustments that may need to
be made after installation are:
•
Configuring the mode of operation and other features on the unit.
•
Setting the twisted pair port for a crossover workstation or pass-through
connection.
To install McBasic 10/100:
1.
First make sure the unit is placed on a suitable flat surface, leaving some space
at the back of the unit.
2.
Attach the cables between the McBasic 10/100 and each device that will be
interconnected.
3.
Plug the unit into a reliable, filtered power source.
NOTE
All network cables must be connected before the link LEDs will glow.
