5
Unmanaged Modules
Before installing, configure the iMcV-10G-Converter modules for desired features.
The DIP Switch settings enable the end user to select the speed/protocol, loopback
modes and Loss Carry Forward (LCF). The table below indicates the available features
and settings for the iMcV-10G-Converter modules.
Switch
Function
Default
1
“ON” to Enable LOS from XFP1 to XFP2
OFF
2
“ON” to Enable LOS from XFP2 to XFP1
OFF
5
4
3
Combination of settings
OFF
OFF OFF
Use Internal clock
OFF
ON
OFF
OC-192 SONET/SDH (9.95 Gb/S)
OFF
OFF ON
10G Ethernet (10.32 Gb/S)
OFF
ON
ON
10G Fibre Channel (10.52 Gb/S)
ON
OFF OFF
ITU G-709 OUT-2 (10.70)
ON
OFF ON
10G Ethernet G.702 (11.09Gb/S)
ON ON OFF
5,4,3
ON ON ON
N.A. (default 0,0,0)
OFF/OFF/
OFF
(Ethernet)
6
“ON” to enable FAULT on DDMI alarm
OFF
7
Enable Loopback XFP1
OFF
8
Enable Loopback XFP2
OFF
