4
LED Operation
Each IE-iMcV-ModeConverter features diagnostic LEDs that provide information on
features and ports.
PWR
Power—indicates power is provided to the module
Glows green when unit is powered on and running
Off when unit is not powered (not operating).
FLT
Fault—indicates a FAULT condition
Glows red when SFP is missing
Off when there are no alarms/alerts
Blinks red if there is an SFP alarm
SD
Signal detect—indicates detection of fiber transmission
Glows green when fiber signal is detected
Glows red when fiber loss of signal is detected
MSA
Multi-Source Agreement—indicates that an MSA-
compliant SFP has been installed
Glows green when SFP is detected
Off if SFP is not detected
MIS
Mismatch—indicates that two different speeds of SFPs
have been installed. The IE-iMcV-ModeConverter will
only support SFPs of the same speed.
Glows red when there is a speed mismatch
Off when speed is OK
FLT
Fault—indicates a FAULT condition
Glows red when SFP is missing
Off when there are no alarms/alerts
Blinks red if there is an SFP alarm
SD
Signal detect—indicates detection of fiber transmission
Glows green when fiber signal is detected
Glows red when fiber loss of signal is detected
MSA
Multi-Source Agreement—indicates that an MSA-
compliant SFP has been installed
Glows green when SFP is detected
Off if SFP is not detected