4
2. Please connect the alligator clips or wires according to the diagram, alligator clips positive pole
connected to the positive terminal, negative pole connected to the negative terminal, the wire
needs to be inserted into the wire hole after the terminal knob is turned open and then tightened,
red or green wire access terminal positive, yellow or blue wire access terminal negative. Its
operation is shown in Figure 3, Figure 4, respectively.
.
3. After all the circuits are connected, check the circuit for other problems, if not, then plug into
Fig3
Fig4
Summary of Contents for YY-12V-600W
Page 7: ......
