Cleaning
44
11 Cleaning
Carefully check hydraulic hoses and electrical cables.
Never treat hydraulic hoses and electric cables with gasoline, benzene, petroleum or
mineral oils.
Lubricate the machine after cleaning it. Especially after the machine has been cleaned
using a high-pressure cleaner/steamer or fat-soluble agents.
Observe the legal requirements concerning the use and disposal of cleaning agents.
When cleaning with a high-pressure cleaner, you must always follow the instructions below:
1.
Maximum permitted pressure is 100 bar.
2.
The maximum temperature is 50 °C
3.
Do not clean the electrical components.
4.
Never direct the jet of the high-pressure cleaner or steamer directly at the stickers,
lubricating points or bearings.
5.
Keep the high-pressure cleaner/steamer a minimum distance of 600 mm away from the
machine.
6.
Observe the safety regulations for the use of high-pressure cleaners.
Summary of Contents for RotoKnife Mini
