Platinum™ Predator II-GX 2RU
Chapter 4
Installation and Operation Manual
Using ZConfigurator
© 2014 Imagine Communications.
Proprietary and Confidential.
Edition E | Page 38
Using ZConfigurator
his chapter introduces how to operate the Predator
II
GX using ZConfigurator.
The following topics are discussed in this chapter:
New Features (on page 38)
Connecting to Predator II GX for the First Time (on page 43)
Using Control View (on page 48)
Introduction to the Layout Editor (on page 53)
Configuring Predator II GX Settings (on page 57)
Operating Notes
When you set the control parameters on the Predator
II
GX, observe the following:
If changes are made to certain parameters, other related parameters may also be affected.
When a parameter is changed, the effect is immediate. However, the module requires a few
seconds to save changes. Once saved, new settings will be restored if the module loses power and is
restarted.
Terminate any unused coaxial output connectors with a 75Ω connector.
New Features
This section discusses features that are relatively new or that are being introduced with the firmware
and software that this manual relates to.
Please see the Help file that accompanies ZConfigurator for a full in-context discussion of new features.
Always check with Customer Service for the latest multiviewer firmware and the latest version of
ZConfigurator to support new features.
Setting Source Options
Both video and computer sources in a PiP can have Main, Video and Status Labels.
However, video sources have a much wider range of possible settings which include Audio Bar Graphs,
Tallies, Comprehensive Alarms, Border size and color, Safe Area and Aspect Ratio Markers and both VITC
and Closed Captions.
Chapter 4
