Platinum™ IP3
Installation and Operation Manual
Resource Module (PX-RES)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 54
If
Sync Mode
is set to
Advanced
, the
Sync Pulse Delay
parameter can be used to specify where the
output switching point is relative to the reference signal. The delay is in units of microseconds.
Switch Triggering
Switch triggering supports the use of independent AES, NTSC, PAL, and tri-level HD references.
The following reference types are supported:
Table 15:
Switch Triggering: Supported Reference Types
0
Unknown or Missing Reference
Line 10
1
Analog 525/60
Line 10
2
Analog 525/60 /1.001
Line 6
3
Analog 625/50
Line 7
4
1920x1080/60I
Line 7
5
1920x1080/60I /1.001
Line 7
6
1920x1080/50I
Line 7
7
1920x1080/30P
Line 7
8
1920x1080/30P /1.001
Line 7
9
1920x1080/25P
Line 7
10
1920x1080/24P
Line 7
11
1920x1080/24PsF
Line 7
12
1920x1080/24P /1.001
Line 7
13
1920x1080/24PsF /1.001
Line 7
