18
UDC-5212 and DTD-5225 Digital Time/Date Display Clocks Installation and Operation Manual
Chapter 2: DTD-5225 Series Digital Time/Date Display
Control Modes
Selection of the clock control modes is achieved with the rear panel DIP
switches.
Figure 2-2
illustrates the possible two DIP switch states
Figure 2-2.
DIP Switch Positions
Table 2-10
lists the Clock Control mode DIP switch options.
Table 2-10.
Clock Control Mode DIP switch options
Dip Switch
Switch Postion Options
Left Right
6
Clock
(See
“Clock Mode” on page 19
)
Timecode
(See
“Timecode Reader
Mode” on page 19
)
5
SMPTE
EBU (Sweep seconds)
4
Internal
Line
3
Normal
Use offset (MTG-3901,
CSD-3901/3902, or
CSD-5300 required)
(See
“Auxiliary Offset” on
page 20
)
2
Normal
Use secondary reference
(date if code is present)
(See
“Secondary Reference
Mode” on page 20
)
1
12 Hour (Clock selected);
HH:MM:SS (timecode selected)
DD:MM:YY (date selected)
24 Hour (Clock selected);
MM:SS:FF (timecode
selected);
MM:DD:YY (date selected)
6
5
4
3
2
1
Switch in right postiition
Switch in left postiition
