Selenio
TM
VMG-14+ Hardware Setup Guide
56
Using Element Manager to Finalize Initial Configuration
Gen2 Release 1.4.0
Viewing
VMG
Build
Information
To examine current system build information, select
5
from the TCON main menu. Output similar to the
following example will be displayed.
Enter number of your choice: 5
Build info
-----------------------------------------------------------------
Software Version: 1.1.1 Build# 65583
Imagine Communications Date: 2013-09-11 01:43:45 VMG-TCM
-----------------------------------------------------------------
Using
Element
Manager
to
Finalize
Initial
Configuration
Using a web browser, type the physical IP address of the active NPM’s management interface.
Note:
If two NPMs are installed, the active NPM will be the module in Slot 1.
The URL will be the IP address preceded by ‘http://’ (e.g., if the IP address is
10.32.97.181
the URL is
http://10.32.97.181
). Successful web connection with the VMG results in display of the Video
Multiprocessing Gateway Home page (
Figure 37.
Selenio VMG Home Page
Note:
The VMG Element Manager requires that the PC on which it is running have Java™ Runtime
Environment (JRE) v1.6 Update 39 or higher, or version 1.7 Update 12 or higher. If your PC does not
have the correct JRE installed, it is available free-of-charge from the following sources:
- Imagine Communications Customer Portal.
- Oracle® website—at the Java Technologies pages.
You can access the Oracle website from the Download Java link of the VMG Home page.