Imagine communications Selenio BNP 2xr, User Manual

Page: 58 / 278

Selenio TM BNP User Guide, Release 3.7.1 58
System Configuration
- User Authentication Configuration
Table 27.
AAA Server
Current Server
Order Protocol
A 1 RADIUS
B 2
C 3
D 4 RADIUS
AAA Server List Example
Adding or Editing an AAA Server
Use the Edit AAA Server dialog ( Figure 31 and Table 28 ) to add a new AAA server or to edit an existing
AAA server. You can add up to eight AAA servers.
Menu Path
From the Element Manager tabs, select Configuration -> User Authentication > Servers ; click
the Add button or the Edit button .
Note: At least one AAA server must be enabled when the Remote Only option is selected from the AAA
Global Configuration menu. See “Global User Authentication Configuration” on page 52 for more
information.
Figure 31. Add or Edit AAA Server
Adding an AAA Editing an AAA
1.
At the Edit AAA Server dialog, enter information to define the AAA server details. Be sure to check
the Enable box if this server must be available for the BNP to use when logging in to the BNP
Element Manager via AAA.
2.
Click Apply to save and load the settings.
Table 28. User Authentication - Servers - Add/Edit Server Fields
Field Description
IP Address The IP address of the AAA server. When adding a server, default is blank.
When editing a server, this field is read-only.
Port Enter the TCP port to use on the AAA server. Valid range is: 0 to 65535.
Default for Radius is
1812 .
Default for is 49 .