Imagine communications Selenio BNP 2xr User Manual Download Page 220

Page: 220 / 278

Selenio

BNP User Guide, Release 3.7.1

220

DVB Conditional Access

- DVB-CA Configuration

If an external EIS server is being used (i.e., the

Enable

button in this window checked), the

DVB-CA

Global Configuration

window of

Figure 159

will appear as follows:

Figure 159. DVB-CA Global Configuration - External EIS mode default

Fill out the fields of this window according to the descriptions listed in

Table 94

Click

Apply

to save any changes.

If the

Enable

button next to the

External EIS Port Number

field has been checked or unchecked,

the system will prompt for a reboot. Click

Yes

to accept the reboot.

Table 94

describes the fields available in the

DVB-CA Global Configuration

window.

Table 94.

DVB-CA Global Configuration fields

Field

Description

Internal EIS mode or

External EIS mode

Scramble Level

Specifies the default scramble level for the BNP
chassis. The default is set to TS (transport
stream). This field is read-only.

Common to both

Crypto Period Duration
(100ms)

Specifies the default crypto period for the BNP
chassis in 100 millisecond increments.
• The default is set to 200 (which is 20,000

msecs, or 20 seconds).

Common to both

CW Mode

Specifies the Control Word mode to be used for
the BNP chassis. Choose one of the following
options from the pull-down menu:
•

Conformance 64-bits

Non-conformance

64-bits

Fixed 0

, or

Fixed 1

• Default is

Conformance 64-bits

Common to both

CAS Mode

Specifies the CAS mode for the BNP chassis.
Default is

Broadcast

mode; this field is read-only.

Common to both

Summary of Contents for Selenio BNP 2xr























































































































































































































































































Search results

Summary of Contents for Selenio BNP 2xr

Reviews:

Related manuals for Selenio BNP 2xr

Brands by name

Popular brands

Imagine communications Selenio BNP 2xr, User Manual

Search results

Summary of Contents for Selenio BNP 2xr

Reviews:

Related manuals for Selenio BNP 2xr

Brands by name

Popular brands