Selenio
TM
BNP User Guide, Release 3.7.1
149
- Grooming - Mapping
describes the fields available in the
Configure Elementary Stream Mapping
window.
Table 80.
Configure Elementary Stream Mapping
Category
Field
Description
Source
Port
Displays the source GigE or ASI port of the elementary
stream’s input program.
TS ID:
Displays the source Transport Stream ID of the ES’s input
TS.
Program Number
Displays the source program number of the ES’s input
program.
Program Name
Displays the source program name of the ES’s input
program.
Destination
Port
Displays the destination GigE or ASI port of the output port
to which the ES will be groomed.
TS ID:
Displays the destination Transport Stream ID of the output
TS to which the ES will be groomed.
Program Number
Displays the destination program number of the output
program to which the ES will be groomed.
Program Name
Displays the destination program name of the output
program name to which the ES will be groomed.
PMT PID
Displays the Program Map Table PID assigned to the
output program.
The displayed value—as either hexadecimal or decimal—
is based on the current setting from
Configuration
--
>
Global PID Display.
SCTE 30 to 35
Conversion
Displays whether or not
SCTE 30 to 35 Conversion
has
been enabled for the output program to which the ES will
be groomed.
Component PIDs
Input Type & PID
Output Type & PID
Displays the ES
Input Type
and
PID
,
Output Type
and
PID
.
For
Input Type
, the options that will be seen are as follows:
• Data
• EBIF
• EISS
Click the blue space under Output Type or PID to enter a
reserved PID for this ES.
Treat as Async Data
When grooming a data, EBIF, or EISS ES to an output
program, the Treat
as Async Data
option will always be
enabled.
When data is treated as
Async Data
, then the timing
information in the data stream is not processed.
