Selenio
TM
BNP User Guide, Release 3.7.1
131
- Grooming - Mapping
•
Manual configuration, as described in “Creating Programs Manually,” next.
•
Drag and drop grooming, as described in “Drag and Drop Grooming” on page 140.
For either method, the program mapping configuration is identical. You can also schedule programs by
using either method.
Creating Programs Manually
Use the
Create Output Program
dialog to set parameters for an output program. Fields displayed in
the
ETV Configuration
portion of this dialog are the result or PIDs priority setting as either
Ad
or
Network
.
Menu Path
From the
Outputs
panel of the
Grooming -> Mapping
tab, right-click on a transport
stream and select
Create Program
from the popup menu (
and
).
Figure 78.
Create Output Program
ETV PIDs Priority set to
Ad
ETV PIDs Priority set to
Network
1.
At the
Create Output Program
dialog, set parameters for the program, then click
OK
.
