background image

A. The filters can be removed for cleaning or replace-

ment (see CHECKING AND CLEANING THE FIL-
TERS on page 13).

B. The underwater light can be used for night opera-

tion (see USING THE CONTROLS on page 12). The
spa includes both red and blue covers for the light.

C. The temperature probe monitors water temperature.

D. The volcano jet provides a soothing foot massage. 

E. The whirlpool jet diverts the water flow three differ-

ent ways. By turning the outer ring, you can divert
the water flow between the volcano jet (D), the other
jets on the spa, and the whirlpool jet (E), which cre-
ates a whirlpool action. Note: The outer ring may
be hard to turn while the pump is turned on high.

F. The four suction fittings provide water to the

pumps. Never operate the spa without the suction
covers in place.

G. An optional ozone generator can be purchased and

installed to utilize the ozone jet. Ozone helps sani-
tize the spa with minimal chemical treatment.

H. The console controls the spa jets, turns the under-

water light on and off, and adjusts the water tem-
perature setting (see USING THE CONTROLS on
page 12).

I. The four air controls regulate the air flow to the

whirlpool, hydrotherapy, and volcano jets.

J. The four neck jets can be adjusted to spray sooth-

ing water on your neck. To activate the neck jets,
turn the neck jet valves (P) counterclockwise. To
turn the neck jets off, turn the valves clockwise.

K. The twenty rotary jets provide a spinning massage.

Note: The jets labeled K1 are always on.

L. The six rotary jets provide a pulsating massage

action. Rotate the outer ring counterclockwise to
turn the jets on. Rotate the outer ring clockwise to
turn the jets off.

M. The four variable-flow jets are fully adjustable.

Turn the outer rings to regulate the flow.

N. The two power massage jets provides a soothing

massage to your lower back. Turn the outer ring to
regulate the flow.

O. The skimmer cleans the surface of the water.

P. The neck jet valves control water flow to the four

neck jets (J). To completely turn off the water flow to
the jets, see Pump Button 2 on page 12.

11

Spa Shell Diagram

A

O

L

B

D

I

E

I

H

F

L

M

P

P

J

J

M

L

K

K

K

K

K

K

K

K1

K

K

G

C

N

N

L

L

L

K

Summary of Contents for IMSB63910





















Reviews: