background image

HOW TO OPERATE THE PERSONAL TELEVISION

IMPORTANT: Before operating the television, you
must connect a 75 ohm CATV cable to the 75 ohm
terminal on the treadmill. See page 9 for instruc-
tions.

Follow the steps below to operate the television.

Insert the key into the console.

See HOW TO TURN ON THE POWER on page
12. 

Press the Power button to turn on the
television. 

When the key is inserted, the television will auto-
matically turn on. If you have turned off the televi-
sion, turn it on by pressing the Power button.

Press the Channel buttons to select the
desired cable channel.

Note: Complete this step only if you are using
analog cable. Otherwise, change channels
through an external source such as your cable
box or your VCR.

When the television is turned on, the screen will
show the last cable channel that was selected. To
select a different channel, press the Channel but-
tons. The selected cable channel number will ap-
pear on the screen for a few seconds. Note: The
television is equipped with a channel memorizing
function that allows you to go directly from the cur-
rent channel to the next channel saved in mem-
ory. Before channels can be selected in this way,
they must be saved in the television’s memory.
See HOW TO USE THE INFORMATION MODE
at the right.

Press the Volume buttons to adjust the volume. 

When either Volume button is pressed, the vol-
ume level indicator will appear on the screen for a
few seconds. To temporarily mute the sound,
press the Mute button. Press the Mute button
again to listen to the television. Note: To use ear-
phones or headphones (not included), plug them
into the headphone jack on the console. 

When you are finished using the television,
press the Power button.

Press the Power button to turn off the television.
Note: Removing the key from the console will also
turn off the television.

HOW TO USE THE INFORMATION MODE

The console features an information mode that allows
you to view treadmill usage information, select a sys-
tem of measurement for the console, and turn on and
turn off the demo mode. The information mode also al-
lows you to adjust the settings of the television and to
save channels into the television’s memory.

Follow the steps below to use the information mode.

Hold down the Stop button while inserting the
key into the console.

When the information mode is selected, the left
display will show the total number of hours that the
treadmill has been used. The right display will
show the total number of miles or kilometers that
the walking belt has moved. 

In addition, the right display will show the letter “E”
for English miles or the letter “M” for metric kilome-
ters. Press the Speed increase button to change
the unit of measurement if desired.

IMPORTANT: 

If the letter “d” appears in the right

display, the “demo” mode is selected. This mode
is intended to be used only when a treadmill is
displayed in a store. When the demo mode is se-
lected, the power cord can be plugged in, the key
can be removed from the console, and the dis-
plays and indicators on the console will automati-
cally light in a preset sequence. The buttons on
the console will not function. 

If a “d” appears in

the right display when the information mode is
selected, press the Speed decrease button.

Press the Power button and adjust the
brightness, contrast, color, sharpness, and/or
hue of the television.

When the Power button is pressed, the brightness
level indicator will appear on the television screen.
Press the Volume buttons to adjust the brightness
setting if desired.

Next, press the Channel buttons until the contrast,
color, sharpness, or hue level indicator appears.
Adjust the settings, if desired, by pressing the
Volume buttons.

2

1

5

4

3

2

1

20

Summary of Contents for Advanced 2200































Reviews: