background image

18

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the 
lowest position. If this is not done, the treadmill may be per-
manently damaged. Next, unplug the power cord. CAUTION:
You must be able to safely lift 45 pounds (20 kg) to raise,
lower, or move the treadmill.

1. 

Hold the metal frame firmly in the location shown by the
arrow at the right. CAUTION: To decrease the possibility
of injury, do not lift the frame by the plastic foot rails.
Make sure you bend your legs and keep your back
straight. As you raise the frame, make sure to lift with
your legs rather than your back.

Raise the frame about

halfway to the vertical position. 

2. Move your right hand to the position shown and hold the

treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the frame until the hole in the isola-
tor is aligned with the latch pin, and then slowly release the
latch knob. 

Make sure that the latch pin is fully inserted

into the center of the isolator. 

To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sun-
light. Do not leave the treadmill in the storage position in
temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, convert it to the storage position as
described above. 

Make sure that the latch pin is fully in-

serted into the isolator.  

1.  Hold one of the handrails and place your other hand on the

deck. Place one foot against one of the wheels.

2.  Tilt the treadmill back until it rolls freely on the wheels.

Carefully move the treadmill to the desired location. 

To re-

duce the risk of injury, use extreme caution while mov-
ing the treadmill. Do not move the treadmill over an un-
even surface.

3.  Place one foot against one of the wheels, and carefully lower

the treadmill until it is resting in the storage position.

Handrails

Deck

Wheels

Engaged

Isolator

Storage 

Latch

Frame

Summary of Contents for 15.5



























Reviews: