XLED-6MPCW
USER’S MANUAL
Classification
y
Protection against electric shock : Class I Equipment.
y
Degree of protection against electric shock : No applied parts.
y
Degree of protection against the ingress of water : ordinary IPX0.
y
Degree of safety in the presence of flammable anesthetics mixture with air or with oxygen
or with nitrous oxide : Not suitable for use in the presence of flammable anesthetics
mixture with air or with oxygen or with nitrous oxide.
This equipment has been tested and found to comply with the limits for medical devices to
the IEC 60601-1-2:1994. These limits are designed to provide reasonable protection against
harmful interference in a typical medical installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to other devices in the vicinity. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to other devices, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures :
y
Reorient or relocate the receiving device.
y
Increase the separation between the equipment.
y
Connect the equipment into an outlet on a circuit different from that to which the other
device(s) are connected.
y
Consult the manufacturer or field service technician for help.
