background image

6

Congratulations for selecting the new IMAGE

®

RENEW 615 hydrotherapy spa. The innovative
RENEW 615 spa allows you to enjoy all the benefits of
hydrotherapy in the comfort and privacy of your home. 

Hydrotherapy is a proven method for soothing tired
muscles after exercise or for relieving the stress of a
busy life. The warm environment stimulates blood flow,
which is essential in the healing process, and the 
powerful massage action further eases tension and
stress throughout the body. The RENEW 615 hydro-
therapy spa gives you the specialized treatment you
need to feel your best.

For your benefit, read this manual carefully before
using the RENEW 615. 
If you have questions after
reading the manual, call our Customer Service
Department toll-free at 1-877-897-7493, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
mention the product model number and serial number
when calling. The model number is
IMSB61500/IMSG61500. The serial number can be
found on a decal attached to the access panel inside
the spa (see the front cover of this manual).

Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.

Corner Panel

Locking

Buckle

Long Access

Panel

Short Access

Panel

Console

Air

Control

Spa Shell

Filter

Jets

Before You Begin

Summary of Contents for IMSB61502





















Reviews: