Image Engineering
Seite
4
von
11
1.2.2 USB connection
Only an appropriate USB connection allows an error-free operation of the LE7. Use delivered USB cables. If you
need to extend the USB connection to longer distances, check if powered hubs/repeaters are necessary.
1.3 General safety information
WARNING!
Some LEDs emit invisible light in the IR and the UV near area.
•
Do not
look directly into the emitted light or through the optical LED system.
•
Do not
look directly into the sphere or light source when using high intensities or sequences
with a low response time.
•
Do not
open the device without instructions from the Image Engineering support team or
when connected to the power supply.
2 GETTING STARTED
2.1 Scope of delivery
o
Integrating sphere (with a dual slot for D280 size charts)
o
Spectrometer (built-in)
o
Power cord
o
USB cable
o
Control software
o
Calibration protocol
Accessories:
o
Rolling Cart
Optional equipment:
•
iQ-Trigger:
The iQ-Trigger is a mechanical finger that can press the camera release button within 25
ms. When working with touchscreens, exchange the solid fingertip for a touch pen tip.
