Image Engineering
Seite
3
von
5
1 INTRODUCTION
Important information: Read the manual carefully before using this device.
Inappropriate utilization may cause damage to the device, to the DUT (device under test), and/or other
components of your setup.
Keep these instructions in a safe place and pass them on to any future user.
1.1 Conformity
We, Image Engineering GmbH & Co. KG, hereby declare that the CAL4-E corresponds to the essential
requirements of the following EC directive in its current version:
•
Electromagnetic Compatibility - 2014/30/EU
1.2 Intended use
The integrating sphere is designed to measure color, resolution, OECF, dynamic range, and noise when using
the endoscopy light source.
•
Only suitable for indoor use.
•
Place your system in a dry, constant tempered environment without light interference.
•
The optimal ambient temperature range is 22 to 26 degrees Celsius.
1.3 General safety information
•
Do not
look directly at the open sphere or light source when using high intensities.
•
Do not
open the device without prior instructions from the Image Engineering support team.
2 GETTING STARTED
2.1 Scope of delivery
•
CAL4-E
– 30 cm integrating sphere (without light source)
•
Four adapters for various types of endoscopes
•
High temperature resistant cold-light cable, XENON approved
3 OPERATING INSTRUCTIONS HARDWARE
3.1 Requirements
•
Endoscope
•
Projector
