Setup & Operator Manual Compass Product Line
L610-0220 REV A
7
4.
EMC (Electromagnetic Compatibility) Statement
Portable and Mobile RF Communications Equipment will not affect the Compass Products,
which are non-electrical system. No special precautions needed regarding EMC when Compass
Products are installed, operated, and maintained.
5.
Compass Product Main Assemblies (versions may vary)
6.
Compass Product Components
7.1.
Item 1: Yoke Shaft – inserts into vertical spring arm, attached by means of a shaft arm key and
collar to lock key in place. Arrows show full rotation in both directions.
7.2.
Item 2: Window Side Supports
7.3.
Item 3: Compression Hubs with Hardware. Arrows show full rotation in both directions.
7.4.
Item 4: Window Clamping Brackets
7.5.
Item 5: Sterile Bag Retention Tabs – When installing a Sterile Bag, slip bag up from the bottom of
the window and place bag elastic over Retention Tabs on both sides. Dashed line in view above
represents bag position during procedures.
7.6.
Item 6: Leaded Acrylic Window – Pb 0.5 mm rating.
2
1
6
1
5
1
1
1
4
1
3
1
7
1
