16
II) Cancellation of the existing configuration :
1) Press the key B and hold down.
2) With your other hand, press key A during 2s.
Released the key A.
A “bip” sound.
A double "bip" means an error occurred.
If so, start again from item 1).
3) Press the key C, always with your finger on
the key B.
A “bip” sound if manipulation is succeeded, if it
isn’t so, start again from item 1).
4) Remove your fingers from the touch control, then press again on key A during few
seconds, until blinking [ E ] symbols appear.
5) Wait until [ E ] symbols stop blinking.
6) After few seconds, [ E ] are automatically transformed in [ C ]. The existing setup has
been cancelled.
III) How to reconfigure the hob ?
1) Take a ferromagnetic pot with a minimum diameter of 16 cm.
2) Select a cooking zone by pushing on the corresponding key.
3) Place the pot on the area to be set.
4) Wait until the [ C ] display becomes a [ - ]. The selected cooking zone is now
configured.
5) Follow the same procedure for each cooking zone with a [ C ] display.
6) All the cooking zones are configured once all the displays are turned off.
Please use the same pot for the whole procedure.
Never put several pots together on the zones during the setup-process.
- If [ E 4 ] displaying remains, please call the customer care.
The hob or the cooking zone doesn’t start-up :
•
The hob is badly connected on the electrical network.
•
The protection fuse cut-off.
•
The locking function is activated.
•
The sensitive keys are covered with grease or water.
•
An object is put on a key.
The control panel displays [ U ] :
•
There is no pan on the cooking zone.
•
The pan is not compatible with induction.
•
The bottom diameter of the pan is too small.
Continuous ventilation after cutting off the hob :
•
This is not a failure, the fan continuous to protect the electronic device.
•
The fan cooling stops automatically.
Summary of Contents for ILD9E
