5
USER
IMPORTANT
SAFETY WARNINGS
Check that the electrical system and the sockets have
the capacity to withstand the maximum power of the
appliance which is shown on the plate.
If in doubt, contact a qualified person.
The device must be connected directly to the power sup-
ply with the correct polarity.
The connection must have a device ensuring discon-
nection from the network, with an opening distance of the
contacts that allows complete disconnection in the con-
ditions of overvoltage category III, in accordance with in-
stallation instructions.
If the socket is not suitable for the plug, replace it with a
suitable one and in this case contact a qualified person
who will also check if the cable section of the socket can
withstand the power consumed by the appliance. The
power cable does not have a fitted plug. For connection
see “Electrical connection” section. The use of adapters,
multiple sockets or extension leads, is not recommended.
When the appliance is not used for a long time, remove
the electrical connection and disconnect the mains swi-
tch.
Do not block ventilation or heat dissipation slots.
If the appliance’s electrical power cable is damaged, it
must only be replaced by a manufacturer approved ser-
vice centre.
4
5
6
7
8
9