WEATHER BAND OPERATION
Programming a Single S.A.M.E. County Code
Programming Multiple S.A.M.E. County Codes
1. Turn off the unit by pressing
POWER AL OFF
on top of the unit.
2. Press
SETUP
to open menu options.
3. Rotate the
SEARCH
wheel to scroll through menu options until “3. COUNTY CODE” is displayed.
4. Press
ENTER
followed by the
SEARCH
wheel to scroll through ”ALL”, “SINGLE” or “MULTIPLE”.
5. Choose “SINGLE”, followed by
ENTER
. ”Code 01” will be displayed and the first digit space will
start
blinking.
6. Use the
SEARCH
wheel to scroll through the digits 0-9. Input the first digit and press
ENTER
to
confirm that selection and move to the next digit.
7. Continue programming all 6 digits this way. When finished, press
ENTER
and your entered code
will be saved.
NOTE:
The single county code you set will automatically become the “CODE 01” of multiple county codes.
1. Press
SETUP
to open menu options while unit is in standby mode.
2. Rotate the
SEARCH
wheel to scroll through menu options until “3. COUNTY CODE” is displayed.
3. Press
SELECT
and then rotate the
SEARCH
wheel to scroll through “ALL”, “SINGLE” or “MULTIPLE”.
4. Choose “MULTIPLE”, and press
ENTER
.
5. Use the
SEARCH
wheel to scroll through code locations 1-25. (You are able to program up to 25
different county codes into your radio).
6. Choose the location you want and press
ENTER
. The first digit space will start blinking.
7. Use the
SEARCH
wheel to scroll through the digits 0-9. Input the first digit and press
ENTER
to
save that selection and move to the next digit.
8. Continue programming all 6 digits this way. When finished, press
ENTER
and your entered code
will be saved.
9. To program your next code, rotate the
SEARCH
wheel to go to the next code location. When
you have entered all your desired codes, press
SETUP
to store your settings.
iLuv | 20
iMM183 | V10M10_IM_EN_09092009
